分离式拼缝混凝土叠合板受力性能研究

为研究采用马镫钢筋作为抗剪拉结钢筋的分离式拼缝混凝土叠合板的受力性能,通过3块简支板的静力加载试验,对其在不同马镫钢筋布置下的荷载-挠度曲线、承载能力、变形性能进行了研究,并分析了其裂缝成因、拼缝处受力机理,推导了其开裂荷载的计算式。结果表明:规范分离式拼缝叠合板的荷载-挠度曲线发展趋势为三折线形,其开裂荷载计算与普通叠合板计算有所区别; 试件拼缝处易产生沿着叠合面的撕裂破坏,其附加钢筋容易发生局部滑移或者锚固失效; 试件屈服荷载受附加钢筋的黏结滑移影响有一定的降低,其极限承载力取决于拼缝处现浇混凝土与预制板的拉结强度; 试件拼缝处裂缝数目与宽度和马镫钢筋有关,合理改变马镫钢筋布置能够有效减少裂缝数目及宽度; 试件屈服前变形呈现整体弯曲,屈服后变形主要集中在拼缝处,最终试件均出现了混凝土压碎现象,其破坏形态呈现二折线形; 根据相关规范,针对附加钢筋滑移问题可通过锚固弯钩、加长钢筋长度、抬高钢筋位置等措施进行改进。     

不同龄期混凝土高温后力学性能研究

为研究不同龄期混凝土高温后的力学性能变化,对不同养护龄期的混凝土设置不同的温度和继续养护时间,对其抗压强度和劈裂抗拉强度进行试验。结果表明：各龄期混凝土的抗压强度和劈裂抗拉强度随经历温度的升高基本呈下降趋势,但当温度不高于100 ℃,龄期不大于14 d 时,其强度反而略有上升。混凝土经历相同温度情况下,高温时龄期越早,强度越低。随着高温后继续养护时间的增加,混凝土的强度逐渐恢复,且高温龄期越早,恢复程度越高,但强度恢复增幅逐渐降低。     

Evaluation of a large dish‐type concentrator solar lighting system for underground car park

To utilize solar energy more efficiently and reduce lighting power consumption in underground public spaces such as car park, a large dish‐type concentrator solar lighting system is put forward along with its evaluation, which is a unique design to apply a laminated layer of beam split thin‐film coating and thin‐film solar cells onto the dish reflector. The collected sunlight is split into 2 parts, one being reflected into a fiber optical bundle and transmitted for daylighting, while the rest being absorbed by solar cells for electricity generation as the other way to replenish daylighting. A set of 4 solar lighting systems using 3.28‐m diameter dish are designed to meet the lighting requirement in a 1771‐m² underground car park. A mathematical model is adopted to calculate the output power and conversion efficiency of solar cells distributed on the parabolic dish surface. The indoor illuminance distribution is given by lighting simulation. The results indicate that the average daylight illuminance in the car park can vary between 62.7 and 284 lx on February 25, 2016 and between 62.7 and 353 lx on August 17, 2016 for 2 chosen days, respectively. For the presented design, the electricity produced by solar cells is just enough to power light‐emitting diodes for lighting meeting a criterion at night. Considering about 19% conversion efficiency of solar cells and the efficacy of 129.5 lm/W of light‐emitting diodes, the hybrid solar lighting system can have about 40% utilization ratio of solar energy, so it can be concluded that a sufficient lighting provision can be provided by the proposed large dish‐type concentrator solar lighting system for applications in underground car park.     

分体滑动导叶可调涡轮激波与载荷波动机制

针对某柴油机用可调涡轮在低速工况下的低效强激波特征，提出并设计了一种分体滑动导叶，并在10%、40%和100% 3个典型开度下进行了定常/非定常数值计算。结果表明：分体滑动导叶在小开度下可实现对间隙泄漏流动的有效抑制，大幅度提高涡轮效率；在10%开度下，分体滑动导叶提高了涡轮10%的峰值效率，同时涡轮效率在40%和全开工况下也有不同程度的提高。此外，通过合理设计转静间距，分体滑动导叶尾缘激波被大幅度削弱。导叶间隙泄漏流和尾缘激波的抑制可有效弱化转子定子干涉强度，降低下游转子叶片表面载荷波动幅值，提高转子叶片的可靠性。     

Experimental study and CFD numerical simulation of an innovative vapor splitter in dividing wall column

The vapor split ratio (R_V) adjustment plays an important role on energy efficiency during dividing wall column (DWC) operation. In order to achieve active control of R_V, this aticle presents an innovative vapor splitter driven by hydraulics. The vapor flows into main tower from prefractionation section through the rectangle hole located at the end of the partition. Vapor splitting is implemented by the change of flow resistance at the rectangular hole caused by adjusting the liquid level on the bottom plate. This design makes full use of the hydraulic properties in DWC, employing simpler construction with single tunable parameter. Numerical simulations and laboratory tests were both carried out to validate its performance in the DWC with a diameter of 600 mm. The results demonstrate that the desired R_V can be handled effectively in the approximate range from 0.5 to 2, basically satisfying the industrial demand for the gas distribution.     

Hydrogen evolution and quantum calculations for potassium sorbate as an efficient green inhibitor for biodegradable magnesium alloy staples used for sleeve gastrectomy surgery

This work-study the hydrogen evolution rate and inhibitive properties of potassium sorbate, as an antimicrobial and food preservative substance, on the corrosion performance of biodegradable AZ91E magnesium alloy utilized as staples in Sleeve Gastrectomy surgery. This substance used for the first time to protect the alloy from the fast surface degradation process when surrounded by simulated peritoneal fluid (SPF) as a corrosive environment in the stomach. Theoretical quantum calculations were utilized to ensure the inhibition effect of potassium sorbate for the tested alloy as a staple. The corrosion resistance was assessed via electrochemical measurements. The degradation and hydrogen evolution rate is found to be significantly reduced with increasing potassium sorbate concentration. The outcomes displayed that the higher concentration of potassium sorbate (10⁻³ M) is the most effective corrosion resistant one with inhibition efficiency reaches 99.6% which is mainly ascribed to the creation of a thin protective film of Mg-sorbate. The results were confirmed with a scanning electron microscope (SEM) images. A cell viability test for the alloy was done using MTT assay which clarifies that the alloy immersed in the higher potassium sorbate concentration have higher cell viability and proliferation.     

开缝衬套挤压工艺影响TA15孔疲劳增益研究

采用对比疲劳试验方法,研究了相对挤压量、终铰参量、衬套开缝放置角度等工艺参数和特征对开缝衬套挤压TA15钛合金连接孔疲劳增益的影响。结果表明,开缝衬套挤压技术可有效提高TA15钛合金孔结构疲劳强度,延长其疲劳寿命；相对挤压量越大,孔挤压疲劳增益越大,但是TA15钛合金对挤压量非常敏感,微小的相对挤压量波动会导致显著的疲劳增益波动；在完全去除开缝衬套在孔壁遗留的材料凸脊前提下,0.190 mm和0.065 mm两种单边终铰参量对TA15孔结构挤压疲劳增益有明显影响,0.190 mm单边铰削量时挤压疲劳增益更大,而非终铰参量越小越好；在s_max=400 MPa,R=0.1疲劳载荷条件下,衬套开缝与试样最窄截面平行放置,仍能够获得明显的疲劳增益,但相对于与试样与最窄截面呈90°放置,疲劳增益会略有下降,建议在实际孔挤压操作中,衬套开缝尽量避开最窄截面放置。     

新型超高强钢筋连接套筒的性能试验与研究

将多种规格的600 MPa级高强热轧钢筋与直螺纹套筒相结合,基于4种直径的高强钢筋与套筒共45个试件的组合试验成果,得到套筒在钢筋机械连接方式下的单向拉伸试验、高应力反复拉压试验及大变形反复拉压试验各阶段性能的表现数据,相关数据均可满足规范规定。同时,将相同直径高强钢筋采用普通与新型套筒连接的试验结果进行了对比。性能试验的结果可为完善钢筋机械连接计算理论、修订结构设计、推广高强钢筋等技术应用提供参考依据,实现可持续发展。     

An algorithm for computing compatibly Frobenius split subvarieties

This paper describes an algorithm which produces all ideals compatible with a given surjective Frobenius near-splitting.     

小型胶套式液压卡盘的设计

为了适应当前煤矿井下对钻机高可靠性和低能耗的需求,研制了一种小型胶套式液压卡盘。从小型化、可靠性、节能等方面,侧重地介绍了卡盘的结构和工作原理,并进行了理论分析计算。